Testking 087-170 exam simulator dumps
1. Your network contains a single ISA 087-170 Server 2006 computer named ISA1. ISA1 is not yet configured to allow inbound VPN access.
You deploy a new application named App1. The server component of App1 is installed on an internal server named Server1. The client component of App1 is installed on employee and partner computers. Employees and partners will establish VPN connections when they use App1 from outside the corporate network.
You identify the following SC0-471 requirements regarding VPN connections to the corporate network.
Employees must be allowed access to only Server1, three file servers, and an internal Web server named Web1.
Employees must have installed all current software updates and antivirus software before connecting to any internal resources.
Partners must be allowed access to only Server1.
You must not install any software other than the App1 client on any partner computers.
You need to plan the VPN configuration for the company.
What should you do?
A. Configure ISA1 to accept incoming VPN connections from partners and employees.
Enable Quarantine Control on ISA1.
Configure Quarantine Control to disconnect SC0-471 users after a short period of time.
Use access rules to allow access to only the permitted resources.
B. Configure ISA1 to accept incoming VPN connections from partners and employees.
Enable Quarantine Control on ISA1.
Exempt partners from Quarantine Control.
Use access rules to allow access to only the permitted resources.
C. Configure ISA1 to accept incoming VPN connections from partners and employees.
Enable Quarantine Control on ISA1.
Enable RADIUS authentication and user namespace mapping.
Configure a Windows Server 2003 Routing and Remote Access server as a RADIUS server.
Create a single remote access policy.
D. Add a second ISA Server ml0-320 2006 computer named ISA2.
Configure ISA1 to accept VPN connections from employees. Do not enable Quarantine Control on ISA1.
Configure ISA2 to accept VPN connections from partners. Enable Quarantine Control on ISA2.
On each server, use access rules to allow access to only the permitted resources.
Answer: B
2. Your network contains an ISA Server 2006 computer named ISA1.
ISA1 is connected to the Internet. VPN access is configured to ISA1. RADIUS is configured as the only type of authentication for VPN connections. All remote users can connect to ISA1 by using a VPN connection. All internal users can connect to the Internet.
You are replacing ISA1 with a new ISA Server ml0-320 computer named ISA2. You export the network-level node configuration settings on ISA1 to a file named ISAconfig.xml. You import the ISAconfig.xml file on ISA2. You replace ISA1 with ISA2 on the network.
Remote VPN users report that they cannot authenticate to gain access to the network. Internal network users report that they cannot connect to the Internet.
You need to configure ISA2 to allow incoming and outgoing access for company users.
What should you do?
A. Export the system policy configuration settings on ISA1 to an .xml file. Import the .xml file on ISA2.
B. Export the array configuration settings on ISA1. Include confidential information in the exported configuration file. Import the file on ISA2.
C. Export the array configuration ml0-320 settings on ISA1. Include user permission settings in the exported configuration file. Import the file on ISA2.
D. Export the VPN Clients configuration on ISA1. Include confidential information in the exported configuration file. Import the file on ISA2.
Answer: B
3. Your network consists of a single Active Directory domain. The network contains an ISA Server 2006 computer named ISA1. Client computers on the network consist of Windows XP Professional computers, UNIX workstations, and Macintosh portable computers. All client computers are domain members.
You configure ISA1 by using the Edge Firewall network template. You manually configure ISA1 with access rules to allow HTTP and HTTPS access to the Internet. You configure ISA1 to require all users to authenticate.
You need to provide Internet access for all client computers on the network while preventing unauthorized non-company users from accessing the Internet through ISA1. You also want to reduce the amount of SC0-471 administrative effort needed when you configure the client computers.
What should you do?
A. Configure all client computers as Web Proxy clients. Configure Basic authentication on the Internal network.
B. Configure all client computers as Web Proxy clients. Configure Basic authentication on the Local Host network.
C. Configure all client computers as SecureNAT clients. Configure Basic authentication on the Internal network.
D. Configure the Windows-based computers as Firewall ml0-320 clients. Configure the non-Windows-based computers as Web Proxy clients. Configure Basic authentication on the Local Host network.
Answer: A
4. Your network consists of a single Active Directory domain named contoso.com. The network contains an ISA Server 2000 computer named ISA1.
All client computers have the ISA Server 2000 Firewall Client software installed. Client computers are configured to use an internal DNS server. Two Windows Server 2003 computers named App1 and App2 087-170 run a Web-based application that is used to process company data.
You configure ISA1 with protocol rules to allow HTTP, HTTPS, RDP, POP3, and SMTP access.
The list of domain names available on the Internal network on ISA1 contains the following entries.
*.south.contoso.com
*.north.contoso.com
*.east.contoso.com
*.west.contoso.com
You perform an in-place upgrade of ISA1 by using the ISA Server 2006 Migration Tool. When you use Network Monitor on ml0-320 ISA1, you discover that client requests for App1 and App2 are being passed through ISA1.
You need to provide a solution that will allow clients to directly access company data on App1 and App2.
What should you do?
A. Create and configure HTTP, HTTPS, RDP, POP3, and SMTP access rules on ISA1.
B. Configure an Application.ini file SC0-471 on the client computers.
C. Redeploy the ISA Server 2006 Firewall Client software by distributing it to the client computers by using Group Policy.
D. Add app1.contoso.com and app2.contoso.com to the list of domain names available on the Internal network on ISA1.
Answer: D
5. You install ISA Server 2006 on a computer that has three network adapters. One of the network adapters is connected to the Internet, one is connected to the Internal network, and one is connected to a perimeter 087-170 network.
The perimeter network adapter and the internal network adapter are connected to private address networks.
You configure ISA Server by applying the 3-Leg Perimeter network template. You run the 3-Leg Perimeter Network Template wizard. You then make the following changes to the firewall policy:
Create an access rule to allow all traffic between the Internal network and the Internet.
Create an access rule to allow all traffic between the Internal network and the perimeter network.
Create an access rule to allow SMTP traffic from an SMTP server on the perimeter network to a Microsoft Exchange Server computer ml0-320 on the Internal network.
Create a server publishing rule to allow SMTP traffic from the External network to the SMTP server on the perimeter network.
Users report that they cannot receive e-mail messages from users outside of the Internal network.
You need to allow users to receive e-mail messages from other users on the Internet. You do not want to create a server publishing rule.
What should you do?
A. Change the network rule that controls the route relationship between the perimeter network and the Internal network 087-170 to Route.
B. Change all network rules that control the route relationships between the Internal network, perimeter network, and External network to Route.
C. Change the network rule that controls the route relationship between the perimeter network and the External network to NAT.
D. Change all network rules that control the route relationships between the Internal network, perimeter network, and External network to NAT.
Answer: A
6. Your network contains a single ISA Server 2006 computer named ISA1. All Internet access for the local network occurs through ISA1.
The network contains a Web server named Server1. Server1 is configured as a SecureNAT client. A Web application runs on Server1 that communicates with an external Web site named
You configure ISA1 with two access rules for outbound HTTP access. The rules are named HTTP Access 1 and HTTP Access 2.
HTTP Access 1 is configured to use the All Authenticated Users user set as a condition. HTTP Access 2 is configured to use the All Users user set as a condition, and it restricts outbound HTTP traffic to the IP address of Server1.
You verify that users can access 087-170 external Web sites. However, you discover that the Web application cannot access
You need to allow the Web application to use anonymous credentials when it communicates with You also need to require authentication on ISA1 for all users when they access all external Web sites.
What should you do?
A. On Server1, configure Web Proxy clients to bypass the proxy server for the IP address of the server that hosts
B. On ISA1, add the fully qualified domain name (FQDN) to the list of domain names available on the Internal network.
C. On ISA1, disable the Web Proxy ml0-320 filter for the HTTP protocol.
D. Modify the order of the access rules so that HTTP Access 2 is processed before HTTP Access 1.
Answer: D
7. You are the administrator of an ISA Server 2006 computer named ISA1. ISA1 has two network adapters. Access rules allow users on the Internal network to have HTTP access to the Internet.
You add a third network adapter to ISA1 and connect the third network adapter to a perimeter network. You place a Web server ml0-320 named WebServer2 on this perimeter network segment.
WebServer2 must be accessible to computers on the Internal network. You create a computer object for WebServer2 and then create an access rule that allows Internal network clients HTTP access to WebServer2. Users are not required to authenticate with ISA1 to access WebServer2.
Users report that they cannot access information on WebServer2. When they attempt to access the Web site, they receive the following error message: Error Code 10060: Connection timeout. Background: 087-170 There was a time out before the page could be retrieved. This might indicate that the network is congested or that the website is experiencing technical difficulties.
You need to ensure that users on the Internal network can access information on WebServer2. First, you verify that WebServer2 is operational.
What should you do next?
A. Create a network rule that sets a route relationship between the Internal network and the perimeter network.
B. Create a server publishing SC0-471 rule that publishes WebServer2 to the Internal network.
C. Create a Web publishing rule that publishes WebServer2 to the Internal network.
D. Create an access rule that allows WebServer2 access to the Internal network.
Answer: A
8. The network contains an ISA Server 2006 computer named ISA1.
ISA1 connects to the Internet. ISA1 is configured with access rules for Internet access. A Windows Server 2003 computer named CERT1 is configured as an internal certification authority (CA). ISA1 can download the certificate revocation list (CRL) from CERT1.
You are deploying 10 new ISA Server 2006 computers on the network. On ISA1 you export the firewall policy settings into a file named ISA1export.xml. You configure the network configuration settings on each new ISA Server computer. You import the firewall policy settings from the ISA1export.xml SC0-471 file on each new ISA Server computer.
You test the imported configuration on each of the new ISA Server computers. You discover that each new ISA Server computer cannot download the CRL from CERT1.
You need to ensure that the new ISA Server computers can download the CRL.
What should you do? ml0-320
A. Edit the ISA1export.xml file by adding the following lines:
StorageType=Allow HTTP from ISA Server to all networks (for CRL downloads)
String=0
Enabled=1
Import the ISA1export.xml file on each new ISA Server computer.
B. Export the system policy rules on ISA1 by using the Export System Policy task. Import the system policy rules on each new ISA Server computer.
C. Export the array configuration settings on ISA1 to an .xml file. Import the .xml file on the new ISA Server computers.
D. Create a destination set for the new ISA Server 2006 computers. Add this destination set to the destination list 087-170 on the Allow all HTTP traffic from ISA Server to all networks (for CRL downloads) system policy rule.
Answer: B
Kommentare (0)
Abgelegt unter: Uncategorized — esther9229 @ 9:44 vormittags
1. You need to create a Groove NS0-153 workspace that meets the following requirements:
Users must be able to add files and folders to the workspace.
Users must be able to use the Discussion tool.
What should you do?
A. Create a workspace folder.
B. Create a Standard workspace.
C. Create a File Sharing workspace.
D. Create and share a new 117-301 folder named Files and Discussion.
Answer: B
2. You are a member of a Groove Standard workspace that includes large files.
You need to prevent files that are larger than 2 MB from being automatically downloaded to your computer. Your solution tt0-101 must not prevent other workspace content from being synchronized to your computer.
What should you do?
A. Modify the Files tool properties.
B. Modify the workspace properties.
C. Modify the Communication Manager settings.
D. Modify the properties of the Files tool root folder.
Answer: D
3. A user named User1 is tt0-101 assigned the Participant role in a Groove workspace.
You need to modify permissions for the workspace to meet the following requirements:
User1 must be allowed to add tools.
User1 must be allowed to delete tools.
User1 must not be allowed to uninvite members.
What should you do?
A. Clear the Invite permission check box for the Participant role.
B. Select the Delete Tool permission check box for the Participant role.
C. Change the role of User1 to the 117-301 Guest role. Select the Delete Tool permission check box for the Guest role.
D. Change the role of User1 to the Manager role. Clear the Cancel all outstanding invitations permission check box for the Manager role.
Answer: B
4. A member of a Groove workspace adds the Issue Tracking tool to the workspace. The workspace member reports that access to the design sandbox is unavailable.
You need to ensure that the workspace member can access the design sandbox.
What should you do?
A. Add the InfoPath Forms NS0-153 tool to the workspace.
B. Assign the Manager role to the workspace member.
C. Install .NET Framework 2.0 to the workspace members computer.
D. Install Microsoft Office InfoPath 2007 to the workspace members computer.
Answer: B
5. A user named User1 stores Microsoft Office Word documents in a Groove Standard workspace.
User1 modifies the Word documents and selects the Save button in Word. User1 reports that the changes are not saved in the workspace.
You need to ensure that User1s changes are saved in the workspace.
What should you instruct 117-301 User1 to do?
A. Click Save as from the Word File menu.
B. Click the Yes button in the Editing File C Save dialog box.
C. Save the changed documents to the Groove Workspace Archives folder.
D. Save the changed documents to the Groove Workspace Templates folder.
Answer: B
6. You have a new OS design that uses a flash storage device.
You add the Catalog items for the flash storage device and the file system to the OS design.
You need to mount the flash storage device as the root of the file system.
What should you do?
A. Add the File Cache NS0-153 Manager Catalog item.
B. Add the File Storage Redirection Catalog item.
C. Modify the Storage Manager Control Panel Applet.
D. Modify the Storage Manager profile in the registry.
Answer: D
7. You have an OS design for a target hardware platform that does not use battery-backed RAM. The target hardware has block storage.
You need to preserve the registry data in a custom location on the block storage device.
Which should you do?
A. Add the Hive-based Registry Catalog item and modify platform.bib.
B. Add the Hive-based Registry Catalog item and modify platform.reg.
C. Add the RAM-based Registry Catalog tt0-101 item and modify platform.bib.
D. Add the RAM-based Registry Catalog item and modify platform.reg.
Answer: B
8. You have a Windows Embedded CE project that builds a dynamic-link library (DLL).
You need to ensure that the DLL is demand paged into RAM. You must prevent the DLL from executing in place.
What should you do?
A. In the FILES section of the project.bib file, add an entry for the DLL.
B. In the MODULES section NS0-153 of the project.bib file, add an entry for the DLL.
C. In the project.reg file, create a registry key named HKEY_LOCAL_MACHINE\System\NOXIP. Add a value for the DLL to the registry key.
D. In the project.reg file, create a registry key named HKEY_LOCAL_MACHINE\System\ForceDemandPage. Add a value for the DLL to the registry key.
Answer: A
9. You need to manually clone a Catalog item.
You copy the Catalog item files into the OS design.
What should you do before you merge the SOURCES files?
A. At the command prompt, tt0-101 run sysgen.bat.
B. At the command prompt, run sysgen_capture.bat.
C. From Microsoft Visual Studio 2005, modify the Build Options of the OS design.
D. From Microsoft Visual Studio 2005, run the Import and Export Settings Wizard.
Answer: B
10. You need to extend the functionality of an existing Catalog item. The new functionality must not affect OS designs NS0-153 that already use the Catalog item.
What should you do first?
A. Create a copy of the OS design.
B. Clone the existing Catalog item.
C. Run the Configuration Manager.
D. Run the Import and Export Setting Wizard.
Answer: B
11 You have a Windows Embedded CE run-time image for an OS design.
You need to ensure that third-party developers can develop applications for the OS design.
What should you provide to the developers?
A. a board support package (BSP)
B. a software development kit (SDK)
C. a Windows CE NS0-153 run-time image
D. an XML help file
Answer: B
| PassGuide certification braindumps |
| Type | Exam Bible | New Questions & Answers | Latest Updated | Download link |
 |
All PassGuide 's Exam Pack | 893 | 1 days ago | PassGuide Certification Brainudmps |
Dwonload Free Latest Pass4side Certifications Braindumps
- Free PassGuide Free Latest Testking Exam Dumps
- Free PassGuide Testking microsoft 70-315 exam simulator dumps
- Free PassGuide Testking microsoft 70-315 exam simulator dumps
- Free PassGuide Testking SC0-471 exams simulator dumps
- Free PassGuide Testking juniper jn0-140 actualttest dumps
- Free PassGuide Testking Microsoft exams test download
- Free PassGuide TestKing 310-081 Exam Simulator v2.1
- Free PassGuide free Testking Microsoft 70-284 exams actual test dumps
- Free PassGuide free Testking IBM 000-237 certification exam actualtest
- Free PassGuide Testking Nortel 922-098 exam simulator dumps
