pass4side juniper jncia-ex jn0-400 exam
Dear Fast Track Participants:
We have an exciting update to the Juniper Networks Certification Fast Track Program to tell you about.
Juniper Networks Education Services has developed new courseware and a brand new certification for our recently announced Enterprise Switching products—and both are available to you through the Fast Track Web Portal! In addition to the existing Enterprise Routing and Enhanced Services materials available through the portal, you now also have access to the following:
- JUNOS as a Switching Language eLearning Course: The new enterprise Ethernet switching features of the JUNOS software now make it possible to operate Juniper Networks enterprise switches with the same operating system you already use to manage the routers on your network. This 110-minute program is designed to teach network engineers who have experience configuring and managing Ethernet switches using Cisco’s IOS how to use the new enterprise Ethernet switching features of the JUNOS software on EX-series devices.
- Operating Juniper Networks Switches in the Enterprise Instructor-Led Course: This course discusses the configuration of Juniper Networks EX-series switches in a typical network environment. Key topics include a platform overview, user configuration interfaces, initial and secondary system configuration tasks, operational monitoring of an EX-series switch, Ethernet switching concepts, the Spanning Tree Protocol (STP), inter- VLAN routing, switching security protocols and features, IP telephony features, and design and implementation considerations.
- Juniper Networks Certified Internet Associate–Enterprise Switching (JNCIA-EX) Preassessment Exam: Once participants pass this exam, they will receive a voucher to take the JNCIA-EX associate-level certification exam at any Prometric Testing Center worldwide at a 100% savings through August 31, 2008! Act now because beginning September 1, 2008, we will offer the exams at a 50% savings.
Visit the Fast Track Web Portal today and accelerate your career as a networking professional by achieving another Juniper Networks certification.
If you have any questions, please contact us at certification-fasttrack@juniper.net.
http://www.certbible.org/juniper-jncia-ex-ojxe-study-guide/
Operating Juniper Networks Switches in the Enterprise Student Guide
Chapter 1: Course Introduction.. .1-1
Chapter 2: Introduction to Juniper Networks Enterprise Switches . .2-1
Overview of Enterprise Switching Platforms. .2-3
Architecture and Packet Flow 2-14
Network Management Options .. . . . 2-23
Chapter 3: User Interface Options. . . . . .3-1
User Interface Options . . .3-3
Active and Candidate Configurations ..3-6
Using the J-Web Graphical User Interface . . .3-9
Using the JUNOS Software Command-Line Interface .. . . 3-19
Lab 1: User Interface Options 3-64
Chapter 4: Installation and Initial Configuration.4-1
Installation Guidelines . . .4-3
Rescue and Factory-Default Configurations. .4-7
Configuration Checklist 4-14
Initial Configuration Options . 4-16
Lab 2: Initial Configuration . . 4-31
Chapter 5: Secondary System Configuration . .5-1
User Configuration and Authentication . . . . .5-3
System Logging and Tracing . 5-13
Network Time Protocol. 5-24
Archiving Configurations . . . . 5-27
Dynamic Host Configuration Protocol . . . . . 5-30
Simple Network Management Protocol . . . 5-38
Lab 3: Secondary System Configuration . . 5-45
Chapter 6: Operational Monitoring and Maintenance..6-1
Monitoring Platform Operation .6-3
Network Utilities . 6-11
Maintaining JUNOS Software 6-16
File System Maintenance and Password Recovery 6-22
Lab 4: Operational Monitoring .. . . . 6-31
Chapter 7: Virtual Chassis Systems.. . . .7-1
Virtual Chassis System Overview .. . . .7-3
Deployment Options and Installation ..7-8
Management and Operation . 7-15
Lab 5: Virtual Chassis System 7-32
Chapter 8: Interface Support, Configuration, and Monitoring.8-1
Interface Support and Configuration.. 8-3
Monitoring Interface Operation .. . . . 8-16
Interface Features . . . . 8-21
Lab 6: Interface Configuration 8-32
Chapter 9: Ethernet Switching and Virtual LANs 9-1
Ethernet LANs .. . . 9-3
Bridging Basics .. . 9-7
VLANs . . 9-17
Configuring and Monitoring VLANs .. 9-24
Routed VLAN Interface . 9-29
Lab 7: Ethernet Switching and VLANs. . . . . 9-35
Chapter 10: Spanning Tree Protocol. . . .10-1
Overview of the Spanning Tree Protocol . . . 10-3
Overview of the Rapid Spanning Tree Protocol . 10-12
Overview of the Multiple Spanning Tree Protocol 10-23
Configuring and Monitoring STP, RSTP, and MSTP .. . . . 10-28
Overview of a Redundant Trunk Group . . . 10-37
Configuring and Monitoring Redundant Trunk Groups .. 10-40
Lab 8: Spanning Tree . 10-47
Chapter 11: Inter-VLAN Routing.. .11-1
Overview of Inter-VLAN Routing .. . . . 11-3
Routing Support on EX-series Switches . . . 11-8
Routing Table and Route Preference . . . . 11-10
Static Routing .. 11-15
Lab 9, Parts 1–3: RVI and Static Routing . 11-22
OSPF . . 11-23
Lab 9, Part 4: Single-Area OSPF .. . 11-36
Virtual Router Redundancy Protocol . . . . . 11-37
Lab 9, Part 5: VRRP . . 11-45
Chapter 12: Routing Policy and Firewall Filters .12-1
Policy Framework . . . . . 12-3
Routing Policy Overview 12-8
Configuring and Monitoring Routing Policy12-18
Firewall Filter Overview . . . . 12-22
Configuring and Monitoring Firewall Filters . . . . 12-30
Lab 10: Routing Policy and ACLs .. . 12-38
Chapter 13: Switching Security .. .13-1
MAC Limiting .. . . 13-3
DHCP Snooping.13-10
Dynamic ARP Inspection . . . 13-17
802.1X . 13-24
Lab 11: Switching Security . 13-42
Chapter 14: IP Telephony Services . . . . .14-1
Power over Ethernet. . . 14-3
Voice VLAN .. . . 14-15
LLDP . . 14-20
LLDP-MED .. . . . 14-28
Lab 12: IP Telephony Services .. . . 14-41
Chapter 15: Design and Implementation of Layer 2 Networks . . . . .15-1
Network Development Life Cycle .. . 15-3
Network Design Assistance . 15-12
Implementation Examples . . 15-15
Case Study .. . . 15-20
Lab 13: Design and Implementation . . . . 15-31
Appendix A: Acronym List . . . . A-1
This four-day course discusses the configuration of Juniper Networks EX-series switches in a
typical network environment. Key topics include a platform overview, user configuration
interfaces, initial and secondary system configuration tasks, operational monitoring of an
EX-series switch, Ethernet switching concepts, the Spanning Tree Protocol (STP), inter-VLAN
routing, switching security protocols and features, IP telephony features, and design and
implementation considerations. This course is based upon JUNOS software for EX-series
switches Release 9.0R2.
Through demonstrations and hands-on labs, you will gain experience in configuring and
monitoring the EX-series switches.
After successfully completing this course, you should be able to:
• Describe common deployment options for the EX-series switches.
• Perform operational monitoring tasks typically associated with EX-series switches.
• Install and configure an EX-series switch in a network.
• Form a Virtual Chassis system by connecting multiple EX-4200 switches.
•Configure and monitor virtual LANs (VLANs).
• Create a loop-free network environment using STP.
• Implement inter-VLAN routing using static and dynamic methods.
• Define and apply routing policy and firewall filters.
• Secure a switch port using available port access security features.
• Configure and monitor IP telephony features such as Power over Ethernet (PoE),
voice VLAN, and the Link Layer Discovery Protocol (LLDP).
• Design and implement a Layer 2 network using EX-series switches.
http://junipers.cn/Cert/Jncia/Files/816.html
http://www.certbible.org/jncia-ex-ojxe-detailed-lab-diagrams-and-detailed-lab-guide/
Lab 1: EX-series User Interface Options (Detailed) . 1-1
Part 1: Logging In to J-Web 1-2
Part 2: Exploring J-Web Monitoring Capabilities . . . 1-3
Part 3: Exploring J-Web Configuration and Diagnostic Capabilities 1-8
Part 4: Logging In Using the CLI . . . 1-13
Part 5: Experimenting with the CLI’s Operational and Configuration Modes 1-14
Lab 2: Initial System Configuration (Detailed) . 2-1
Part 1: Loading a Factory-Default Configuration . . . 2-2
Part 2: Performing Initial Configuration Using J-Web 2-6
Part 3: Performing Initial Configuration Using the CLI . . 2-11
Lab 3: Secondary System Configuration (Detailed) . 3-1
Part 1: Loading the Baseline Configuration . . . 3-2
Part 2: Configuring User Authentication . . 3-4
Part 3: Performing System Management Options . 3-14
Part 4: Configuring and Verifying DHCP . 3-21
Lab 4: Operational Monitoring and Maintenance (Detailed) . . 4-1
Part 1: Monitoring System and Chassis Operation . 4-2
Part 2: Using Network Utilities and Monitoring Traffic. . . 4-7
Part 3: Upgrading JUNOS Software . 4-10
Part 4: Recovering the Root Password . . 4-14
Lab 5: Virtual Chassis Systems (Detailed) 5-1
Part 1: Loading a Predefined Configuration . . . 5-2
Part 2: Configuring Virtual Chassis Parameters 5-4
Part 3: Monitoring Virtual Chassis Operation . 5-11
Part 4: Restoring Standalone Switch Functionality 5-15
Lab 6: Interface Configuration (Detailed) . 6-1
Part 1: Loading a Predefined Configuration and Configuring the me0 Interface . 6-2
Part 2: Configuring and Monitoring Layer 2 Interfaces . . 6-6
Part 3: Configuring and Monitoring a LAG for Layer 3 Operation . 6-17
Lab 7: Ethernet Switching and VLANs (Detailed) . . . 7-1
Part 1: Configuring Interfaces for Layer 2 Switching Operation . . . 7-2
Part 2: Monitoring Layer 2 Switching Operation . . . 7-5
Part 3: Configuring and Monitoring VLANs . . . 7-11
Lab 8: Spanning Tree (Detailed) 8-1
Part 1: Preparing the Switch and Verifying Proper Operation . 8-2
Part 2: Configuring and Monitoring RSTP. 8-9
Part 3: Configuring and Monitoring MSTP . . . 8-17
Part 4: Configuring and Monitoring a Redundant Trunk Group . . 8-26
Lab 9: Inter-VLAN Routing (Detailed) . 9-1
Part 1: Preparing the Switch and Verifying Proper Operation . 9-2
Part 2: Configuring and Monitoring a Routed VLAN Interface . 9-6
Part 3: Configuring and Monitoring Static Routing. 9-13
Part 4: Configuring and Monitoring OSPF 9-18
Part 5: Configuring and Monitoring the Virtual Router Redundancy Protocol (VRRP) . 9-25
Lab 10: Routing Policy and Firewall Filters (Detailed) . . .10-1
Part 1: Preparing the Switch and Verifying Proper Operation 10-2
Part 2: Configuring and Monitoring Routing Policy. 10-6
Part 3: Configuring and Monitoring Firewall Filters . . . 10-12
Lab 11: Switching Security (Detailed) 11-1
Part 1: Preparing the Switch and Verifying Proper Operation 11-2
Part 2: Configuring and Monitoring MAC Limiting . 11-4
Part 3: Configuring and Monitoring DHCP Snooping and DAI . . . 11-15
Part 4: Configuring 802.1X . . 11-26
Lab 12: IP Telephony Services (Detailed) .12-1
Part 1: Preparing the Switch and Verifying Proper Operation 12-2
Part 2: Configuring and Monitoring Power over Ethernet . . . 12-8
Part 3: Configuring and Monitoring the Link Layer Discovery Protocol 12-13
Part 4: Configuring and Monitoring Link Layer Discovery Protocol-Media Endpoint Discovery and
Voice VLANs 12-20
Lab 13: Design and Implementation (Detailed) . . . .13-1
Part 1: Reviewing and Discussing Design and Implementation Requirements. . 13-2
Part 2: Loading a Predefined Configuration . . 13-5
Part 3: Implementing and Verifying System Configuration . . 13-5
Part 4: Implementing and Verifying Interface and VLAN Configuration . . . 13-10
Part 5: Implementing and Verifying RSTP Configuration . . . 13-18
Part 6: Implementing and Verifying Inter-VLAN Routing . . . 13-23
Part 7: Implementing and Verifying Port Access Security . . 13-34
Part 8: Simplifying Network Design Through the Use of Virtual Chassis System (Optional) . . . 13-41
ppendix A: Lab Diagrams A-1
Course Overview
This four-day course discusses the configuration of Juniper Networks EX-series switches in a
typical network environment. Key topics include a platform overview, user configuration
interfaces, initial and secondary system configuration tasks, operational monitoring of an
EX-series switch, Ethernet switching concepts, the Spanning Tree Protocol (STP), inter-VLAN
routing, switching security protocols and features, IP telephony features, and design and
implementation considerations. This course is based upon JUNOS software for EX-series
switches Release 9.0R2.
Through demonstrations and hands-on labs, you will gain experience in configuring and
monitoring the EX-series switches.
Objectives
After successfully completing this course, you should be able to:
• Describe common deployment options for the EX-series switches.
• Perform operational monitoring tasks typically associated with EX-series switches.
• Install and configure an EX-series switch in a network.
• Form a Virtual Chassis system by connecting multiple EX 4200 switches.
•Configure and monitor virtual LANs (VLANs).
• Create a loop-free network environment using STP.
• Implement inter-VLAN routing using static and dynamic methods.
• Define and apply routing policy and firewall filters.
• Secure a switch port using available port access security features.
• Configure and monitor IP telephony features such as Power over Ethernet (PoE),
voice VLAN, and the Link Layer Discovery Protocol (LLDP).
• Design and implement a Layer 2 network using EX-series switches.
| PassGuide certification braindumps |
| Type | Exam Bible | New Questions & Answers | Latest Updated | Download link |
 |
All PassGuide 's Exam Pack | 893 | 1 days ago | PassGuide Certification Brainudmps |
Dwonload Free Latest Pass4side Certifications Braindumps
- Free PassGuide Five Q&As Of CCNA 640-460 Exam
- Free PassGuide free pass4side juniper jncia-er jn0-342 vce
- Free PassGuide free pass4side examways juniper exam dumps
- Free PassGuide pass4side Juniper Networks Certification exam dumps
- Free PassGuide trainsignal Cisco CCENT Training Videos
- Free PassGuide free pass4side checkpoint ccmse 156-816 cert exam
- Free PassGuide Pass4side Cisco Access Routing and LAN Switching Exam 642-055 v3.19
- Free PassGuide Testout Cisco Certified Network Associate (CCNA 640-802)
- Free PassGuide free pass4side cisco exam
- Free PassGuide pass4side jncia-ex jn0-400 exam
